China Industrial Welding Column and Boom Welding Manipulator Arm components of gearbox

Item Description

computerized rotary welding column &boom manipulator CZ4040

1. welding column introduction and principal parameter

one. Introduction

 The welding column such as the column (which includes the lifting system,the sliding components,traveling unit,anti-drop insurance units and components),beams (such as rack and driver areas) and so on.
The Column and beam are all created of substantial good quality steel welded with each other, the primary weld by computerized submerged arc welding approach, the overall annealing, anxiety aid, annealing a complete folder, planing mill processing to make certain substantial precision rail and its resistance Grinding, so that the equipment security has been improved. And the beam operate efficiently when operating.which does not make the influence of welding quality quiver and horizontal shaking.

  1. Beam lifting system At the leading of the column, the lifting drive involves an AC motor with a brake, a mix worm equipment box, and many others. The mechanical travel system has a self-locking purpose. The lifting chain is mounted on the sprocket of the output shaft. 1 finish of the lifting chain is linked with the sliding seat, and the other conclude is linked with a counterweight moving in the column. The limit placement of the column is equipped with electrical limit switches and mechanical stops to make certain the basic safety of the equipment.
  2. The beam has a exclusive anti-slide insurance policy unit, when the beam accidental tumble, anti-fall device can quickly start automatically stop falling, with insurance policies. Slide security unit: It is used to ensure that the cross beam will not fall when the lifting chain is broken because of to the support lifestyle or exterior influence, so as to avert needless losses to the equipment and staff.
  3. The beam telescoping adopts gear and racks,AC motor and DC driver.with a large speed variety,stable and reliable,higher precision driver. Rack tooth with heat treatment to lengthen the support existence.
  4. head configuration electric carriage, the efficient stroke: 100 × a hundred mm. The carriage is outfitted with a rotating tee and a CZPT holding system to enable the CZPT to deflect at any angle.
  5. The electrical power offer of beam and column all adopts towline,towline can efficiently protect the cable not ruined.

2. Complex parameter

Specification 2*two 3*three 4*4 5*five 6*6 7*seven 8*eight
Vertical movement distance of growth(m) 2 3 4 5 6 7 8
Horizontal motion distance of increase(m) 2-four 2-six 3-7 3-8 3-8 3-8 4-8
Rotating angle of column ±180°
Vertical velocity of the boom(mm/min) 850 1150
Horizontal speed of the growth(mm/min) 140-1400
Rotating velocity of the boom(r/min) 0.2
The tatol eqally dispersed load of the boom 100 200 300 400 500 500 500
Center distance of the track(optional) P43/2000
the highest diameter can use regular accent to enhance hight.

three. The welding column &increase Advantage:
1) The column and boom are all created of the total box construction,higher mechanical toughness, very good balance, compact framework.
two) Growth growth adopts AC motor variable frequency stepless velocity regulation, the beginning torque is huge, and velocity is regular.
When community voltage fluctuation is ten%, the welding pace fluctuation price is not a lot more than ±3%.
three) Increase telescopic adopts gear rack pair meshing transmission, higher transmission precision, no crawling, and no jitter.
4) The CZPT rail plate is vibration taken care of to eliminate tension after welded, and then via the aircraft, milling approach to make
the track, long service lifestyle, excellent balance.

4.Comprehensive pictur of the welding column&growth manipulator 

Far more detailed welding manipulator images:

 

Type: Welding Manipulator
Structure: Welding Column
Rotaion Speed: 0.3-1.0 M/Min
Voltage: 3pH 380V
Welding Turning Rolls Type: Adjustable
Welding Tilter Type: Flexible Combination

###

Customization:

###

Specification 2*2 3*3 4*4 5*5 6*6 7*7 8*8
Vertical movement distance of boom(m) 2 3 4 5 6 7 8
Horizontal movement distance of boom(m) 2-4 2-6 3-7 3-8 3-8 3-8 4-8
Rotating angle of column ±180°
Vertical speed of the boom(mm/min) 850 1150
Horizontal speed of the boom(mm/min) 140-1400
Rotating speed of the boom(r/min) 0.2
The tatol eqally distributed load of the boom 100 200 300 400 500 500 500
Center distance of the track(optional) P43/2000
the maximum diameter can use standard accessory to increase hight.
Type: Welding Manipulator
Structure: Welding Column
Rotaion Speed: 0.3-1.0 M/Min
Voltage: 3pH 380V
Welding Turning Rolls Type: Adjustable
Welding Tilter Type: Flexible Combination

###

Customization:

###

Specification 2*2 3*3 4*4 5*5 6*6 7*7 8*8
Vertical movement distance of boom(m) 2 3 4 5 6 7 8
Horizontal movement distance of boom(m) 2-4 2-6 3-7 3-8 3-8 3-8 4-8
Rotating angle of column ±180°
Vertical speed of the boom(mm/min) 850 1150
Horizontal speed of the boom(mm/min) 140-1400
Rotating speed of the boom(r/min) 0.2
The tatol eqally distributed load of the boom 100 200 300 400 500 500 500
Center distance of the track(optional) P43/2000
the maximum diameter can use standard accessory to increase hight.

The Parts of a Gearbox

There are many parts of a Gearbox, and this article will help you understand its functions and components. Learn about its maintenance and proper care, and you’ll be on your way to repairing your car. The complexity of a Gearbox also makes it easy to make mistakes. Learn about its functions and components so that you’ll be able to make the best choices possible. Read on to learn more. Then, get your car ready for winter!
gearbox

Components

Gearboxes are fully integrated mechanical components that consist of a series of gears. They also contain shafts, bearings, and a flange to mount a motor. The terms gearhead and gearbox are not often used interchangeably in the motion industry, but they are often synonymous. Gearheads are open gearing assemblies that are installed in a machine frame. Some newer designs, such as battery-powered mobile units, require tighter integration.
The power losses in a gearbox can be divided into no-load and load-dependent losses. The no-load losses originate in the gear pair and the bearings and are proportional to the ratio of shaft speed and torque. The latter is a function of the coefficient of friction and speed. The no-load losses are the most serious, since they represent the largest proportion of the total loss. This is because they increase with speed.
Temperature measurement is another important preventive maintenance practice. The heat generated by the gearbox can damage components. High-temperature oil degrades quickly at high temperatures, which is why the sump oil temperature should be monitored periodically. The maximum temperature for R&O mineral oils is 93degC. However, if the sump oil temperature is more than 200degF, it can cause seal damage, gear and bearing wear, and premature failure of the gearbox.
Regardless of its size, the gearbox is a crucial part of a car’s drivetrain. Whether the car is a sports car, a luxury car, or a farm tractor, the gearbox is an essential component of the vehicle. There are two main types of gearbox: standard and precision. Each has its own advantages and disadvantages. The most important consideration when selecting a gearbox is the torque output.
The main shaft and the clutch shaft are the two major components of a gearbox. The main shaft runs at engine speed and the countershaft may be at a lower speed. In addition to the main shaft, the clutch shaft has a bearing. The gear ratio determines the amount of torque that can be transferred between the countershaft and the main shaft. The drive shaft also has another name: the propeller shaft.
The gears, shafts, and hub/shaft connection are designed according to endurance design standards. Depending on the application, each component must be able to withstand the normal stresses that the system will experience. Oftentimes, the minimum speed range is ten to twenty m/s. However, this range can differ between different transmissions. Generally, the gears and shafts in a gearbox should have an endurance limit that is less than that limit.
The bearings in a gearbox are considered wear parts. While they should be replaced when they wear down, they can be kept in service much longer than their intended L10 life. Using predictive maintenance, manufacturers can determine when to replace the bearing before it damages the gears and other components. For a gearbox to function properly, it must have all the components listed above. And the clutch, which enables the transmission of torque, is considered the most important component.
gearbox

Functions

A gearbox is a fully integrated mechanical component that consists of mating gears. It is enclosed in a housing that houses the shafts, bearings, and flange for motor mounting. The purpose of a gearbox is to increase torque and change the speed of an engine by connecting the two rotating shafts together. A gearbox is generally made up of multiple gears that are linked together using couplings, belts, chains, or hollow shaft connections. When power and torque are held constant, speed and torque are inversely proportional. The speed of a gearbox is determined by the ratio of the gears that are engaged to transmit power.
The gear ratios in a gearbox are the number of steps a motor can take to convert torque into horsepower. The amount of torque required at the wheels depends on the operating conditions. A vehicle needs more torque than its peak torque when it is moving from a standstill. Therefore, the first gear ratio is used to increase torque and move the vehicle forward. To move up a gradient, more torque is required. To maintain momentum, the intermediate gear ratio is used.
As metal-to-metal contact is a common cause of gearbox failure, it is essential to monitor the condition of these components closely. The main focus of the proactive series of tests is abnormal wear and contamination, while the preventative tests focus on oil condition and additive depletion. The AN and ferrous density tests are exceptions to this rule, but they are used more for detecting abnormal additive depletion. In addition, lubrication is critical to the efficiency of gearboxes.
gearbox

Maintenance

Daily maintenance is a critical aspect of the life cycle of a gearbox. During maintenance, you must inspect all gearbox connection parts. Any loose or damaged connection part should be tightened immediately. Oil can be tested using an infrared thermometer and particle counters, spectrometric analysis, or ferrography. You should check for excessive wear and tear, cracks, and oil leaks. If any of these components fail, you should replace them as soon as possible.
Proper analysis of failure patterns is a necessary part of any preventative maintenance program. This analysis will help identify the root cause of gearbox failures, as well as plan for future preventative maintenance. By properly planning preventative maintenance, you can avoid the expense and inconvenience of repairing or replacing a gearbox prematurely. You can even outsource gearbox maintenance to a company whose experts are knowledgeable in this field. The results of the analysis will help you create a more effective preventative maintenance program.
It is important to check the condition of the gearbox oil periodically. The oil should be changed according to its temperature and the hours of operation. The temperature is a significant determinant of the frequency of oil changes. Higher temperatures require more frequent changes, and the level of protection from moisture and water reduces by 75%. At elevated temperatures, the oil’s molecular structure breaks down more quickly, inhibiting the formation of a protective film.
Fortunately, the gear industry has developed innovative technologies and services that can help plant operators reduce their downtime and ensure optimal performance from their industrial gears. Here are 10 steps to ensure that your gearbox continues to serve its purpose. When you are preparing for maintenance, always keep in mind the following tips:
Regular vibration analysis is a vital part of gearbox maintenance. Increased vibration signals impending problems. Visually inspect the internal gears for signs of spiraling and pitting. You can use engineers’ blue to check the contact pattern of gear teeth. If there is a misalignment, bearings or housings are worn and need replacement. Also make sure the breathers remain clean. In dirty applications, this is more difficult to do.
Proper lubrication is another key factor in the life of gearboxes. Proper lubrication prevents failure. The oil must be free of foreign materials and have the proper amount of flow. Proper lubricant selection depends on the type of gear, reduction ratio, and input power. In addition to oil level, the lubricant must be regulated for the size and shape of gears. If not, the lubricant should be changed.
Lack of proper lubrication reduces the strength of other gears. Improper maintenance reduces the life of the transmission. Whether the transmission is overloaded or undersized, excessive vibration can damage the gear. If it is not properly lubricated, it can be damaged beyond repair. Then, the need for replacement gears may arise. However, it is not a time to waste a lot of money and time on repairs.

China Industrial Welding Column and Boom Welding Manipulator Arm     components of gearbox	China Industrial Welding Column and Boom Welding Manipulator Arm     components of gearbox
editor by czh2022-12-23

Tags: